< PreviousPlastic Pipe Cap ø42 5.3 20 ø46 JL-49 Material: Plastic, Black. Used With: ø42 HL4, HLC pipe. Typical Applications: Cap for pipe ends, foot of structure. Secured With: Creform Adhesive or pressure fit. ø42mm Plastic Joint JL-170 Colors: Gray. Used With: ø42 pipe and metal or plastic joints. Typical Applications: Used with joints to taper edge. Note: Adhesive can by used for permanent attachment. I.D. 42 15 15 O.D. 49 Pipe Plug ø42.5 2.5 15 JL-110 Material: Plastic, Black. Used With: ø42 HL4, HLC pipe. Typical Applications: Insert to plug exposed ends of pipe. Secured With: Tap in with mallet, no adhesive required. Surface Treatment: Black Coating. Components: HE-2(2), M8-40B(2). Used With: ø42 & ø28mm pipe to secure parallel pipes. Typical Applications: General Creform heavy-duty structures. 800-839-8823www.creform.com C-16 SECTION C CREFORM ACCESSORIES – 42MM Dimensions are in millimeters. ESD anti static HEJ-1 Surface Treatment: Black Coating. Components: HE-1(2), M8-40B(1). Used With: ø42 & ø28mm pipe to secure parallel pipes. Typical Applications: General Creform heavy-duty structures. HEJ-2 HEJ-2NI Surface Treatment: Conductive Plating. Components: HE-2NI(2), M8-40B(2).Used With: ø42 & ø28mm ESD pipe to secure parallel pipes. Typical Applications: General Creform heavy-duty anti-static structures. HEJ-1NI Surface Treatment: Conductive Plating. Components: HE-1NI(2), M8-40B(1).Used With: ø42 & ø28mm ESD pipe to secure parallel pipes. Typical Applications: General Creform heavy-duty anti-static structures. 44.5 LEJ-12B Surface Treatment: Black Coating. Components: L-14A(2), H-6(4), M8-30B(2 ea), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures. Note: ESD version is part number LEJ-12B-NI.Threaded Insert EL-2265(B/C)-NI Surface Treatment: Conductive Plating. Used With: ø42 HL4, HLC, HLGA pipe and EF-1214-SUS. Typical Applications: Threaded receiver for attaching adjustable feet to structure. Note: Tap with mallet onto pipe end. ESD compatible. 42 46 23 B: M10 C: M12 Corner Plate for ø42mm EL-1041 200 ø42mm 95 100 Surface Treatment: Black Coating. Used With: ø42 pipes, bolt-on casters, bolts (4). Typical Applications: Attach casters to the corners of 42mm structures. Note: Caster mounting hardware included. Does not work with YJ/YK-200 casters. EF-1214-SUS SS Adjuster Pad Foot Material: Stainless Steel. Used With: ø27 stainless pipe, EF-2260C; ø42 pipe, EL-2265C-NI. Typical Applications: Adjustable foot for general purpose structures. Note: Max. load 100kg. ESD compatible. 85 10 18 70 M12 Caster Strap for ø42mm TX-0085 38 ø8 109 Surface Treatment: Plated. Used With: ø42 pipes, bolt-on casters, M8-60 & M8-LW (2). Typical Applications: Attach casters to mobile structures built with 42mm components. Note: Used as both the upper and the lower caster strap. C-17 800-839-8823www.creform.com CREFORM ACCESSORIES – 42MM Dimensions are in millimeters. SECTION C Stanchion Mount, Single ø42.6 120 90 15 ø13.5 EL-1206SA Surface Treatment: Black Coating. Used With: ø42 HL4, HLC and HLGA pipe, TX-0014 anchor bolt(s). Typical Applications: To secure single leg of structure to floor. Secured With: Anchor bolts. ø45 M16 100 16 13 Heavy Duty Height Leveling Foot TX-0010 Surface Treatment: Plated. Used With: EF-1209CA for ø28 pipe, TX-0019 for ø42 pipe. Typical Applications: Height adjustable foot for general purpose structures. Note: Max. load 110kg. ESD compatible. Aluminum Insert, Threaded 42 M16 55 ø38.7 TX-0019 Material: Aluminum. Used With: ø42 pipe, EF-1209A, EF-1209B, TX-0010 feet. Typical Applications: Threaded insert for attaching adjustable feet to structure. Note: Tap into pipe. Position slot to clear weld seam. ESD compatible. EL-1000D Caster Strap, ø42mm Surface Treatment: Plated. Used With: ø42 pipes, bolt-on casters, M8-50 and M8-LW. Typical Applications: Attach casters to mobile structures built with 42mm components. Note: Used as both the upper and the lower caster strap. 48.5M5 110 ESD anti staticC-18 800-839-8823www.creform.com CREFORM ACCESSORIES – 42MM Dimensions are in millimeters. SECTION C Conveyor Track Mount 2.3 42 43.4 38.7 60 TX-2042C Surface Treatment: Plated. Used With: PCC2 Conveyor, EF-2044, EF-2045, EF-2047D, EF-2047F. Typical Applications: End mounting of conveyor rail for gravity conveyors, flow racks. Conveyor Step Mount TX-2042D Surface Treatment: Plated. Used With: PCC2 Conveyor, EF-2044, EF-2045, EF-2047D, EF-2047F. Typical Applications: Blade stop for flow racks, conveyors. ø42mm Plastic Joint JL-113B Colors: Gray. Used With: ø42 pipe, shelf material. Typical Applications: Intermediate shelf support bracket. TX-0016-42 55 103 ø42 Clear Label Holder for ø42mm Material: Plastic. Special lengths available upon request. Used With: ø42 pipe. Typical Applications: Attach identification labels to racks and shelves. Note: Holds 2" x 4". 2m long version is part number TX-0016-2M42. Metal Pipe Clamp, Flat EL-4018 M8-15 58 38 32 26 ø6.2 ø42 Surface Treatment: Black Coating. Used With: ø42 pipe. Typical Applications: Heavy duty pipe clamp to secure surfaces or miscellaneous devices to 42mm pipe. Note: M8-15 Bolt included. Pipe Clamp, Single Mount EMT42-1 Surface Treatment: Plated. Used With: ø42 pipe, self tapping or wood screws. Typical Applications: Attach flat surfaces such as table tops and shelves to pipe. 26 46 40 EMT42-2 Pipe Clamp, Double Mount Surface Treatment: Plated. Used With: ø42 pipe, self tapping or wood screws. Typical Applications: Attach flat surfaces such as table tops and shelves to pipe. 85 43 22 M8-15 58 38 32 26 ø6.2 ø42 Metal Pipe Clamp, ESD, Flat EL-4018NI Surface Treatment: Conductive Plating (ESD). Used With: ø42 pipe. Typical Applications: Heavy duty pipe clamp to secure surfaces or miscellaneous devices to 42mm pipe. Note: M8-15 Bolt included. ESD anti static 73 48C-19 800-839-8823www.creform.com CREFORM ACCESSORIES – 42MM Dimensions are in millimeters. SECTION C Conveyor Large Stop Mount TX-2042DW Surface Treatment: Plated. Used With: PCC2 Conveyor, EF-2044, EF-2045, EF-2047D, EF-2047F. Typical Applications: Drop stop for flow racks, conveyors. TX-2061A 2.3 42 43.4 50 Slide Pipe Mount, ø42mm Surface Treatment: Plated. Used With: ø42 pipes, slide pipes HK-, HKGA-, HKL-, HKLA-. Typical Applications: End mount on slide pipe for flow lanes. TX-2061E 52 50 2.3 42 43.4 Slide Pipe Mount, Large Stop, ø42mm Surface Treatment: Plated. Used With: ø42 pipes, slide pipes HK-, HKGA-, HKL-, HKLA-. Typical Applications: End mount on slide pipe for flow lanes with stop. 40.9 93.2 108 49.7 EL-2066G Wide Conveyor Track Mount, ø42mm Surface Treatment: Plated. Used With: ø42 pipes, EL-2068, PWA, PWB, PWC, KWA, KWC. Typical Applications: Intermediate stabilizer or coupler. Basic end mount. Note: Multipurpose mount. EL-2066C Surface Treatment: Plated. Used With: ø42 pipe, EL-2068, PWA, PWB, PWC, KWA, KWC. Typical Applications: End mount of conveyor rail for gravity conveyors, ow racks. Wide Conveyor Track Mount, Basic, ø42mm \Wide Conveyor Track Mount, w/Stop, ø42mm EL-2066DW Surface Treatment: Plated. Used With: ø42 pipe, EL-2068, PWA, PWB, PWC, KWA, KWC. Typical Applications: End mount of conveyor rail with drop stop for gravity conveyors, ow racks. Adapter Clip, ø42 Mount to ø42 Pipe EL-2068 Surface Treatment: Plated. Used With: ø42 pipe, EL-2066 mounts, LJ metal joints. Typical Applications: Fits inside ø42 mounts as a spacer clip to adapt them down to ø42 pipe. Note: One or two required per mount.120 68 42 C-20 800-839-8823www.creform.com SECTION C 75 TX-0003-42L Pipe Connector, ø42mm Material: Aluminum. Used With: ø42 pipes. Typical Applications: I.D. connection of two 42mm pipes to modify structures or make pipe runs longer than 4m. Note: Tap into pipe I.D. Add screws or bolts for security. ø42.2 ø38.2 2.6 2.67 3 75 ø38.2 TX-4216A-F 530 120 68 42 Trailer Hitch Tongue for ø42mm Pipe Surface Treatment: Plated. Used With: ø42 pipes and joints and included hardware, TX-4216-T, TIEBAR. Typical Applications: Trailer side of hitch. Note: Tie bar required (see E-21). Inquire for custom lengths. A=530mm & D=830mm. TX-4216-T Trailer Hitch Coupler for ø42mm Pipe Surface Treatment: Plated. Used With: ø42 pipes and joints and included hardware, TX-4216A-F, TX-4216D-F, TIEBAR. Typical Applications: Hitch used on tugger or trailer. Note: Tie bar required. See page E-21. Pipe CutterReplacement Blade EK-7EK-7A Manual Pipe Cutter for ø42mm. Capable of cutting round pipe ranging from 28-42mm in diameter. Pipe cutter requires periodic lubrication. EK-7A is replacement blade set. See catalog tool section. Note: Wrenches for M8 bolts used with 42mm joints. 6mm Hex Allen T-Wrench TX-0003-42E Ergonomic Lift System (115V Electric), ø42mm CREFORM ACCESSORIES – 42MM Dimensions are in millimeters. TX-0003-42S Internal Pipe Reinforcement, ø42mm Material: Aluminum. Used With: ø42 pipe, TX-0003-42E. Typical Applications: Internally reinforces pipes slotted for TX-0003-42E so metal joint can be installed and tightened. Note: Tap into pipe I.D. M6-TM6-L 6mm Hex Allen L-Wrench Used With: 42mm workstations. Typical Applications: Raise/lower structure or work surface. Note: Special units available include manual and electric versions, different capacities, different strokes, different hydraulic tube lengths and six leg systems. Please inquire about spare parts and repairs. *Minimum 100 lb load to lower system. • Lifts kept in stock • 1000 lb (455 kg) capacity* • 12" (305 mm) stroke • Includes (2) TX-0003-42S inserts • Includes (2) TX-0003-42L inserts TX-0003-42 is the manual version of this lift featuring a hand crank. The lift cylinders mount inside Creform’s 42mm pipe. When ordering these systems please specify pipe color and length so we can install cylinders prior to shipment. System comes plumbed and ready to install.C-21 800-839-8823www.creform.com CREFORM 42MM PIPE LOOKS STRONGER. IS STRONGER. 2-1/2 TIMES STRONGER. The 42mm cart stores reels, rolls or spools on cantilevered arms. Each side of the cart features two levels that hold mandrels that that support the reels thru their central core. Load/unload is easy and the reels are free to spin to dispense product. ERGONOMIC HD WORKSTATIONSIMPLE HD MOBILE WORKSTATION WIDE FLOW RACK FOR HEAVY PARTS Heavy-duty flow rack designed to hold heavier than usual containers has 1800 lb. capacity and three, six-lane levels. Each frame has only one angle brace for stability. 42mm/28mm joints permit using 28mm pipe and new JG-34B rollers, which eliminate sliding containers over conveyor mounts. CANTILEVERED ARM CART The 42mm cantilevered cart features two levels of sturdy arms for handling and protecting long parts without the need for packaging. Ergonomic advantages include easy loading/ unloading plus safe transporting. MOBILE FLOW RACK Creform’s wide selection of 42mm and 42mm to 28mm joints provide endless options including conveyor types. This rack features Creform’s new Placon wide roller conveyors as well as skatewheel conveyors. Mobile rack has an 850 lb. capacity. Workstation is rated at 750 lb. using 42mm Creform pipe, a 1" thick surface and only two angle braces for rigidity. Hydraulic height adjustment cylinders mounted inside the 42mm legs quickly, position the work surface and angled shelves. Articulating arm supports computer monitor. This simple to build workstation can handle heavy components without additional bracing. Designing with Creform’s 42mm to 28mm joints allow the use of the smaller diameter pipe for adding accessories providing access to all of Creform’s components. The addition of locking casters provide mobility. REEL HANDLING CART SECTION CC-22 800-839-8823www.creform.com CREFORM 42MM TECHNICAL SPECIFICATIONS Determining 42mm pipe lengths. The following is true for most Creform joints. Please check the catalog for exact dimensions of an individual joint. 900mm Center to Center Dimension A -90mm Pipe Length Inside Joint (45mm x 2) 810mm Pipe Length Creform 42mm pipe strength. • The pipe rests freely at room temperature on two supports • A force is applied at 1/2 A at a speed of 50mm/min. Experimental Conditions For comparison to standard ø28 pipe. Pipe ø Part No. Proportional Limit 42ø HL4, HLGA 190kg (418 lb) 42ø HLC 250kg (550 lb) 28ø H, HC, HGA, HGD 70kg (154 lb) * Proportional limit refers to the point where any further force would permanently deform the pipe. Holding strength of metal joints. (Test conditions) Test speed: 5mm/min. Temperature: Room temperature Max. Load LJ 100 kgf (220 lbf) LEJ 80 kgf (176 lbf) HJ 80 kgf (176 lbf) 28mm Pipe Metal Joints Holding strength of metal joints when a force was applied in the center. Load Limit 28mm Pipe Metal Joints HJ-1 80 kgf (176 lbf) HJ-6 50 kgf (110 lbf) LJ-1A 200 kgf (440 lbf) LJ-6A 150 kgf (330 lbf) LEJ-1A 200 kgf (440 lbf) Note: The above examples refer to metal joints which have been attached at the recommended torque of 9.8N-m (100 kgf-cm or 7-1/4 ft-lb) for M-6 fastener and 10.78N-m (110 kgf-cm or 8 ft-lb) for M-8 fasteners. These results will not be duplicated with other torque values, or in cases where pipe other than Creform standard pipe is used. SECTION C800-839-8823www.creform.com CREFORM PLASTIC JOINTS – 28MM Plastic joints for connecting ø28 pipe (H-, HC-, HPA-, HPB-). Unless otherwise noted, permanent attachment is accomplished using only specially formulated Creform Adhesive (EY-201). Dimensions are in millimeters. See Technical Section H for plastic joint data. When ordering, specify color code, see page B-1. Creform Adhesive J-7WJ-7E Colors: Gray. Used With: ø28 pipe, J-23E, and EF-4025 for temporary set of angle rotation. Typical Applications: Handle of height adjusting table, small shelf of carts. Colors: Black. Used With: HPA-, HPB- pipe, TM6-25 Bolt(4) and M6-P Nut(4). Typical Applications: Intermediate area of double base carts. Note: Works with J-105W. Tighten bolt & nut to 100kg-cm (7-1/4 ft-lb) torque. No adhesive required. J-4EY-201 Colors: Clear Liquid. Used With: Plastic joints except as noted. Note: Packaged in one pint container. MSDS sheet available. Colors: Gray, Ivory. Used With: Three ø28 pipes. Typical Applications: Corner junctions of structures. J-6A, BJ-5 Colors: Gray, Ivory. Used With: Two ø28 pipes. Typical Applications: Upper structure corners, cart handles. Colors: Gray, Ivory. Used With: Four ø28 pipes. Typical Applications: Intermediate junctions of structures. Note: One 100mm axis is a through fit on J-6B. J-7CJ-7A, B Colors: Gray, Ivory. Used With: Three ø28 pipes. Typical Applications: Intermediate junctions of structures. Note: J-7B provides 100mm axis as through fit. Colors: Gray, Ivory. Used With: Two ø28 pipes. Typical Applications: Intermediate junctions of structures. Note: 60mm axis is a through fit. D-1 SECTION D 30 50 20 30 50 20 See Technical Section page H-8 prior to use. See page G-2 for adhesive dispensing bottle. 30 50 50 20 30 30 30 20 30 30 30 20 10 20 60 95 34.5 75 * Hardware sold separately800-839-8823www.creform.com CREFORM PLASTIC JOINTS – 28MM J-14J-13C Colors: Gray, Ivory. Used With: Two ø28 pipes to form cross intersection. Typical Applications: Reinforcement of cart base. Colors: Gray, Ivory. Used With: Two ø28 pipes to form 23º intersection, J-19 (67º). Typical Applications: Structural bracing and reinforcement. J-12BJ-12A Colors: Gray, Ivory. Used With: Four ø28 pipes. Typical Applications: Outer intersection of structures. Colors: Gray, Ivory. Used With: Three ø28 pipes. Typical Applications: Intermediate intersection of structures. Note: 100mm axis is through fit. J-12DJ-12C Colors: Gray, Ivory. Used With: Three ø28 pipes. Typical Applications: Intermediate intersection of structures. Note: 34mm axis is through fit. Colors: Gray, Ivory. Used With: Three ø28 pipes. Typical Applications: Intermediate intersection of structures. Note: 67mm axis is through fit. J-13BJ-13A Colors: Gray, Ivory. Used With: Two ø28 pipes to form cross intersection. Typical Applications: Reinforcement of cart base. Colors: Gray, Ivory. Used With: Two ø28 pipes to form cross intersection. Typical Applications: Reinforcement of cart base. D-2 Plastic joints for connecting ø28 pipe (H-, HC-, HPA-, HPB-). Unless otherwise noted, permanent attachment is accomplished using only specially formulated Creform Adhesive (EY-201). Dimensions are in millimeters. See Technical Section H for plastic joint data. When ordering, specify color code, see page B-1. SECTION D 20 50 20 50 30 30 50 50 20 30 20 50 17 30 17 17 20 30 50 34 34 34 34 34 70 30 23º 70 27 50 34 34800-839-8823www.creform.com D-3 CREFORM PLASTIC JOINTS – 28MM J-23EJ-23A, B Colors: Gray, Ivory. Used With: Two ø28 pipes. Typical Applications: Splice two ends of pipes. Note: J-23B is 80mm long and through fit. Colors: Gray. Used With: ø28 pipe, J-7E, EF-4025 for temporary set of angle or rotation. Typical Applications: Handle of height adjusting work table, small shelf of carts. J-16J-15A, B Colors: Gray, Ivory. Used With: Five ø28 pipes. Typical Applications: Intermediate intersection of structures. Note: J-15B provides one 100mm axis as through fit. Colors: Gray, Ivory. Used With: Two parallel ø28 pipes. Typical Applications: Door lock (44mm pitch). Note: Slip fit or adhesive bonding possible. J-19J-18 Colors: Gray. Used With: Two parallel ø28 pipes. Typical Applications: Door lock (34mm pitch). Note: Slip fit or adhesive bonding possible. Colors: Gray, Ivory. Used With: Two ø28 pipes to form 67º intersection, J-14 (23º). Typical Applications: Structure bracing and reinforcement. J-22A, BJ-21 Colors: Gray, Ivory. Used With: Three ø28 pipes, J-22A(B), J-33, J-42, J-47, J-138. Typical Applications: 73º inclined top structure. Colors: Gray, Ivory (J-22B only). Used With: Four ø28 pipes J-21, J-33, J-42, J-47, J-138. Typical Applications: 73º inclined top of structure. Note: J-22B is three pipe intersection with through fit. Plastic joints for connecting ø28 pipe (H-, HC-, HPA-, HPB-). Unless otherwise noted, permanent attachment is accomplished using only specially formulated Creform Adhesive (EY-201). Dimensions are in millimeters. See Technical Section H for plastic joint data. When ordering, specify color code, see page B-1. SECTION D 50 20 30 50 50 44 50 25 67º 20 50 30 34 50 20 73º 30 30 30 4 1050Next >