< Previous800-839-8823www.creform.com CREFORM PLASTIC JOINTS – 32MM JB-23BJB-15B Colors: Gray. Used With: Four ø32 pipes. Typical Applications: Intermediate area of work stations. Note: One 120mm axis is through fit. Colors: Gray. Used With: Two ø32 pipes. Typical Applications: Intermediate junction of two pipes to adjust height, level surfaces. JB-5JB-4 Colors: Gray. Used With: Three ø32 pipes. Typical Applications: Corner intersection of work station. Colors: Gray. Used With: Two ø32 pipes. Typical Applications: Handle area of carts, work stations. JB-7BJB-6B Colors: Gray. Used With: Three ø32 pipes. Typical Applications: Intermediate areas of work stations. Note: One axis is through fit. Colors: Gray. Used With: Two ø32 pipes. Typical Applications: Intermediate areas of work stations. Note: 120mm axis is through fit. JB-13BJB-12B Colors: Gray. Used With: Three ø32 pipes. Typical Applications: Exterior areas of work stations. Note: 120mm axis is through fit. Colors: Gray. Used With: Two ø32 crossing pipes. Typical Applications: Reinforcement intersection of work stations. D-14 Plastic joints for connecting ø32 pipe (H-, HC-, HPA-, HPB-). Unless otherwise noted, permanent attachment is accomplished using only specially formulated Creform Adhesive (EY-201). Dimensions are in millimeters. See Technical Section H for plastic joint data. When ordering, specify color code, see page B-1. SECTION D 38 38 60 120 40 20 40 120 20 60 40 120 20 120 40 20 20 60 40 100 20 60 40800-839-8823www.creform.com CREFORM PLASTIC JOINTS – 32MM Plastic joints for connecting ø32 pipe (H-, HC-, HPA-, HPB-). Unless otherwise noted, permanent attachment is accomplished using only specially formulated Creform Adhesive (EY-201). Dimensions are in millimeters. See Technical Section H for plastic joint data. When ordering, specify color code, see page B-1. JB-160-EBLJB-118B Colors: Gray. Used With: Two ø32 pipes. Typical Applications: Intermediate T-intersection for work stations, shelves. Colors: Black (ESD). Used With: ø32 HBG- or HBGA- pipe and JG-15B EBL. Typical Applications: Bearing areas of gravity conveyors. Note: Insert by tapping in with a hammer or mallet. No adhesive required. JB-38AJB-26 Colors: Gray. Used With: Two ø32 pipes at 45º angle. Typical Applications: Brace reinforcement for shelves, work station. Colors: Gray. Used With: ø32 pipe. Typical Applications: Temporary or permanent location mark for leveling or adjusting shelves. JB-59CJB-49 Colors: Gray. Used With: ø32 pipe. Typical Applications: End cap for legs of work station, shelf. Colors: Gray. Used With: Two ø32 pipes form crossing T-intersection. Typical Applications: Adding or modifying existing structure, additional reinforcement. JB-110JB-71 Colors: Gray. Used With: Two ø32 pipes form crossing T-intersection. Typical Applications: Exterior reinforcement for shelves, work stations. Colors: Black. Used With: ø32 pipe. Typical Applications: Insert to plug exposed ends of pipe. Note: No adhesive required. D-15 SECTION D ESD anti static 45º 40 10 40 75 ø32 17.5 2.5 ø29 ø31.5 2.5 1.5 13 40 38 20 34 38 4 20 40 38 15 5 15CREFORM ACCESSORIES PART NUMBER-TO-PAGE NUMBER INDEX SECTION E Part Number Description Page Part Number Description Page Part Number Description Page 800-839-8823www.creform.com E-1 CH-01 CUP HOLDER, 3.5" ID, 4" DEEP, BLACK E-32 CP100-3000 PLASTIC SHEETING, LIGHT WEIGHT E-25 DA1-S WIRE DUCT E-6 DA2-S WIRE DUCT E-6 DB1-S WIRE DUCT E-6 EB-1210D M16 THREADED AL INSERT FOR 32 MM E-19 EB-4228SET FLAT HINGE SET W/BUSHING E-20 EF-1000 CASTER STRAP, UPPER, 70 MM E-3 EF-1000A CASTER STRAP, UPPER, 82 MM E-3 EF-1002B CASTER STRAP, LOWER, 70 MM E-3 EF-1002C CASTER SUPPORT PLATE, 70 MM E-3 EF-1002F CASTER STRAP, LOWER, 82 MM E-3 EF-1002G CASTER SUPPORT PLATE, 82 MM E-3 EF-1006 METAL PIPE CONNECTOR, 65 MM E-27 EF-1006A METAL PIPE CONNECTOR, 90 MM E-27 EF-1007 TEMPORARY PIPE UNION E-27 EF-1008B PIPE CLAMP, SINGLE MOUNT E-23 EF-1010A PIPE REST, LOWER GATE E-27 EF-1010B PIPE REST, UPPER GATE E-27 EF-1010C PIPE REST, 20 MM E-27 EF-1010D PIPE REST, 40 MM E-27 EF-1010E PIPE REST, 60 MM E-27 EF-1012 HANGER, PARALLEL HOOK E-27 EF-1012A HANGER, PERPENDICULAR HOOK E-28 EF-1014A SLEEVE HANGER, C-TYPE E-28 EF-1014B SLEEVE HANGER, U-TYPE E-28 EF-1014C HANGER END CAP E-28 EF-1021 METAL GUARD SLEEVE, U-TYPE E-28 EF-1022S FORK POCKET E-28 EF-1023 DOUBLE BASE CORNER SLEEVE E-28 EF-1025 END CAP WITH RING E-28 EF-1026 GRAY RUBBER RING BUMPER, 66 OD E-29 EF-1026B GRAY RUBBER RING BUMPER, 80 OD E-29 EF-1028LL CORNER SUPPORT PLATE, LEFT E-3 EF-1028LR CORNER SUPPORT PLATE, RIGHT E-3 EF-1028SL CORNER SUPPORT PLATE, LEFT E-3 EF-1028SR CORNER SUPPORT PLATE, RIGHT E-3 EF-1200L EXTENDED ADJUSTER FOOT E-18 EF-1200S ADJUSTER FOOT E-18 EF-1203 PLASTIC PIPE CAP, METAL CLAD E-18 EF-1203A PLASTIC PIPE CAP, RUBBER CLAD E-18 EF-1204 METAL END PLUG E-29 EF-1205 STACKING BRACKET, ROUND E-18 EF-1205A STACKING BRACKET, SQUARE E-18 EF-1206S STANCHION MOUNT, SINGLE PIPE E-19 EF-1206W STANCHION MOUNT, TWO PIPES E-19 EF-1209A HEIGHT ADJUSTER FOOT, FULL BASE E-19 EF-1209B HEIGHT ADJUSTER FOOT, FLUSH E-19 EF-1209CA THREADED METAL INSERT E-19 EF-1212 GROUNDING CAP E-29 EF-1250A END SNAP REST E-29 EF-1250B END SNAP RETAINER CLIP E-29 EF-1252A PIPE COVER E-4 EF-1252B PIPE FACING, SMALL E-4 EF-1252C PIPE FACING, LARGE E-4 EF-1253 L-CHANNEL, 20 MM E-4 EF-1253A L-CHANNEL, 30 MM E-4 EF-1253B L-CHANNEL, 40 MM E-4 EF-1253C L-CHANNEL, 47 MM E-5 EF-1253D L-CHANNEL, 60 MM E-5 EF-1253E L-CHANNEL, 90 MM E-5 EF-1253F T-CHANNEL, 20 MM E-5 EF-1253G T-CHANNEL, 30 MM E-5 EF-1253H U-CHANNEL, 20 MM E-5 EF-1253J C-CHANNEL, 10 MM E-5 EF-1254 SLEEVE HINGE E-20 EF-1257 PIPE COVER WITH PANEL SLOT E-5 EF-1264 BOX CORNER CLIPS E-33 EF-1265N PLASTIC BUSHING, LONG E-20 EF-1266N 28 MM LOW FRICTION PIPE COVER E-29 EF-1351 CORNER BOLT E-29 EF-2003 SEPARATOR CLAMP E-29 EF-2005C QUICK RELEASE GATE STRAP E-30 EF-2006 METAL GUARD SLEEVE E-30 EF-2009A MAGNETIC CATCH E-30 EF-2009B MAGNETIC CATCH E-30 EF-2010 PARALLEL PIPE STRAP E-30 EF-2012L SHELF LOCK MOUNT SET, LEFT E-30 EF-2012R SHELF LOCK MOUNT SET, RIGHT E-30 EF-2013A RACK LABEL HANGER, 260 MM E-22 EF-2013B RACK LABEL HANGER, 150 MM E-22 EF-2013C RACK LABEL HANGER, 260 MM E-22 EF-2013D RACK LABEL HANGER, 150 MM E-22 EF-2015 PIPE CLAMP, WITHOUT BLADE E-23 EF-2016A,B,D HITCH SET, TONGUE E-21 EF-2018 PIVOTING STOP, 28 MM PIPE CLAMP STYLE E-15 EF-2044 CONVEYOR, 34 MM PLASTIC WHEEL E-12 EF-2044C CONVEYOR MOUNT E-13 EF-2044D CONVEYOR MOUNT, STOP E-13 EF-2044DW CONVEYOR MOUNT, LARGE STOP E-13 EF-2044E CONVEYOR UNION E-13 EF-2044F CONVEYOR SUPPORT E-13 EF-2044H CONVEYOR SLIDE PIPE UNION E-13 EF-2044J CONVEYOR MOUNT, UNION FLEX E-13 EF-2044M CONVEYOR TRACK CONNECTOR E-13 EF-2044P CONVEYOR TRACK STABILIZER E-14 EF-2045 CONVEYOR, 44 MM PLASTIC WHEEL E-12 EF-2045D CONVEYOR MOUNT W/TALL STOP E-14 EF-2045DW CONVEYOR MOUNT W/EXTENDED STOP E-14 EF-2046 CONVEYOR, ALUMINUM RAIL E-14 EF-2047A CONVEYOR WHEEL, 34 MM E-14 EF-2047B CONVEYOR WHEEL, 44 MM E-14 EF-2047CF CONVEYOR WHEEL, FLANGED E-14 EF-2047D CONVEYOR, NARROW WHEEL E-12 EF-2047DN CONVEYOR WHEEL, NARROW E-14 EF-2047F CONVEYOR, FLANGED WHEEL E-12 EF-2048A CONVEYOR SLIDE CARRIER, 42 MM E-15 EF-2048B CONVEYOR SLIDE CARRIER, 50 MM E-15 EF-2048P CONVEYOR END CLIP, BLACK E-14 EF-2049 CONVEYOR AXLE E-15 EF-2057 PLACON CONVEYOR END CLIP, NARROW E-15 EF-2060C SLIDE PIPE UNION E-23 EF-2060D SLIDE PIPE CROSSOVER MOUNT E-23 EF-2061A SLIDE PIPE MOUNT E-24 EF-2061A-TL 32 MM SLIDE PIPE MOUNT, OVER JOINT E-24 EF-2061B SLIDE PIPE MOUNT W/STOP E-24 EF-2061E SLIDE PIPE MOUNT, LARGE STOP E-24 EF-2065C PLACON WIDE CONVYR MNT, BASIC FOR 28 MM E-8 EF-2065D PLACON WIDE CONVYR MNT, BLADE STOP, 28 MM E-8 EF-2065DW PLACON WIDE CONVYR MNT, DROP STOP, 28 MM E-8 EF-2065E PLACON WIDE CONVYR MN, FIXED UNION FOR 2 E-8 EF-2065G PLACON WIDE CONVYR STABILIZER FOR 28 MM E-8 EF-2065HA PLACON WIDE CONVEYOR COUPLER E-8 EF-2065HB PLACON WIDE CONVEYOR MOUNT, END E-8 EF-2066C PLACON WIDE CNVYR BASIC MNT 32 MM OVER HJ E-9 EF-2066D PLACON WIDE CONVYR MNT, BLADE STOP, 32 MM E-9 EF-2066DC PLACON WIDE CONVYR MNT, ROUND BLADE STOP E-9 EF-2066DW PLACON WIDE CONVYR MNT, DROP STOP 32 MM E-9 EF-2066E PLACON WIDE CONVYR MNT, FIXD UNION, 32 MM E-9 EF-2066G PLACON WIDE CONVY STABLIZER, 32 MM E-9 EF-2067CB 28 MM, W-PLACON MOUNT, HALF UNION E-9 EF-2068 PLACON ADAPTER CLIP, 28 MM PIPE 32 MM MNT E-9 EF-2069 PLACON ADAPTR CLIP, 32 MM PIPE 32 MM MNT E-10 EF-2070A SLIDE PIPE PLUG MOUNT E-24 EF-2070B SLIDE PIPE PLUG MOUNT W/STOP E-24 EF-2070C SLIDE PIPE PLUG, FLUSH MT W/STOP E-24 EF-2070D SLIDE PIPE PLUG MT, W/LARGE STOP E-24 EF-2074 PLACON WIDE CONVEYOR END CLIP E-10 EF-2078A PLACON SIDE GUIDE MOUNT FOR WIDE CONVEYR E-10 EF-2078B PLACON OFFSET SIDE GUIDE MNT, NARROW RLR E-15 EF-2078C PLACON SIDE GUIDE MOUNT, NARROW CONVEYOR E-15 EF-2092C 28 PLACON MOUNT, LOW PROFILE E-11 EF-2092DW 28 PLACON STOP MOUNT, LOW PROFILE E-11 EF-2211 PARALLEL PIPE CLAMP E-30 EF-2901 CLEAR LABEL HOLDER, 180 MM E-22 EF-3000A ROTATING CROSS JOINT E-30 EF-3000B ROTATING CROSS JOINT, OPEN E-31 EF-4004 CAP TYPE HINGE UNION E-31 EF-4006 CAP TYPE HINGE UNION E-31 EF-4008 PIPE HINGE SET, 70 MM E-20 EF-4011 LOCKING END CAP E-31 EF-4012 SLEEVE TYPE CATCH LOCK E-31 EF-4013 SNAP LATCH SET, LONG E-31 EF-4014 SNAP LATCH SET, SHORT E-31 EF-4016 DOUBLE HINGE SET E-20 EF-4017 HINGE SLEEVE SET E-20 EF-4022 CORNER SUPPORT SET E-31 EF-4023 SHELF HOOK E-32 EF-4024 DOOR LATCH E-32 EF-4025 SPRING, 85 MM LONG E-32 EF-6001 TOOL HOLDER, 50 MM, NO NOTCH E-26 & E-32 EF-6001A TOOL HOLDER, 50 MM, NOTCH E-32 EF-6002 TOOL HOLDER, 60 MM, NO NOTCH E-26 & E-32 EF-6002A TOOL HOLDER, 60 MM, NOTCH, IVORY E-32 EF-6003A TOOL HOLDER, 70 MM, NOTCH, IVORY E-32800-839-8823www.creform.com E-2 Caster Hardware E-3 Channel and Extrusions E-4 thru 6 Placon Wide Roller Conveyors E-7 thru 11 Skatewheel and Placon Narrow Conveyors E-12 thru 15 Mini Conveyors E-16 thru 17 Feet E-18 thru 19 Hinges E-20 Hitches E-21 Label Holders E-22 Pipe Clamps E-22 & 23 Slide Pipe Mounts E-23 & 24 Solid Surface Materials E-25 Workstation Accessories E-26 Miscellaneous E-27 thru 33 CREFORM ACCESSORIES PART NUMBER-TO-PAGE NUMBER INDEX Part Number Description Page Part Number Description Page EF-6045 CONVEYOR, MINI, PLASTIC WHEEL E-16 EF-6045C MINI CONVEYOR MT. E-16 EF-6045CNI MINI CONVEYOR MT., ESD E-16 EF-6045D MINI CONVEYOR MT. W/STOP E-16 EF-6045DNI MINI CONVEYOR MT. W/STOP, ESD E-16 EF-6045DW MINI CONVEYOR MT. W/LG STOP E-16 EF-6045DWNI MINI CONVEYOR MT. W/LG STOP, ESD E-16 EF-6045ESD ESD CONVEYOR, 28 MM PLASTIC WHEEL E-16 EF-6045F MINI CONVEYER STABILIZER E-16 EF-6045FNI MINI CONVEYER STABILIZER, ESD E-16 EF-6045JNI MINI CONVEYER UNION, FOR 28MM, ESD E-16 EF-6046 CONVEYOR, MINI ALUM RAIL E-17 EF-6046ESD CONVEYOR, ESD MINI ALUM RAIL E-17 EF-6047A MINI-CONVEYOR WHEEL E-17 EF-6047AESD MINI-CONVEYOR WHEEL E-17 EF-6048A MINI-CONVEYOR SLIDE E-17 EF-6048AESD MINI-CONVEYOR SLIDE, ESD E-17 EF-6049 MINI-CONVEYOR STAINLESS AXLE E-17 EL-2066C PLACON WIDE CONVEYOR BASIC MNT FOR 42 MM E-10 EL-2066DW PLACON WIDE CONVYR MNT, DROP STOP 42 MM E-10 EL-2066G PLACON WIDE CNVYR STABILIZER UNION, 42 MM E-10 EL-2068 PLACON ADAPTER CLIP, 42 MM PIPE E-10 EMT28-1 PIPE CLAMP, SINGLE MOUNT E-22 EMT28-2 PIPE CLAMP, DOUBLE MOUNT E-22 ESD PLASTIC SHEET SOLID SURFACE MATERIAL E-25 HJ-10 METAL JOINT SET FOR 28 MM PIPE, 1-BUSHING E-20 HJ-15 METAL JOINT SET FOR 28 MM PIPE, 1-BUSHNG E-20 HPEA-4000 PANEL CATCH PIPE, SINGLE PANEL E-34 HPEB-4000 PANEL CORNER CATCH PIPE, DUAL PANEL E-34 HPEJ-1 METAL JOINT SET FOR PANEL CATCH PIPES E-34 HPEJ-2 METAL JOINT SET FOR PANEL CATCH PIPES E-34 J-82B PLASTIC JOINT FOR 28 MM E-4 J-82C PLASTIC JOINT FOR 28 MM E-4 KKC2-3000-H16-EBL PLACON SS CNVYR, 15 DIA, 16 CC, 3 M, ESD E-12 KWA2-3000-H43-EBL PLACON WIDE SS CNVYR, 43 CC, STRAIGHT ESD E-7 KWC2-3000-H19-EBL PLACON WIDE SS CNVYR, 18 D, 19 CC, 3 M, ESD E-8 KWL2-3000-H19-EBL WIDE PLACON SS CNVYR, LOW PROFILE E-11 LIGHTS LED AND FLUORESCENT FIXTURES E-26 MONITOR-5 MONITOR MOUNTING BRACKET, 5 NM E-26 MONITOR-6 MONITOR MOUNTING BRACKET, 6 NM E-26 MONITOR-KIT MOUNT FOR MONITOR-5 (PIPE, INSERT, HARDWARE) E-26 PCC2-3000-H16-EBL PLACON CNVYR, 15 DIA, 16 CC, 3 M, ESD E-12 PGRA-3000 PLACON SIDE GUIDE E-10 & ALUMINUM RAILS, 3 M E-15 PWA1-2400-H43 PLACON WIDE CONVEYOR, 43 MM CC, STRAIGHT E-7 PWA3-2400-H57 PLACON WIDE CONVEYOR, 57 MM CC, STRAIGHT E-7 PWA5-2400-H86 PLACON WIDE CONVEYOR, 86 MM CC, STRAIGHT E-7 PWB1-2400-H43 PLACON WIDE CONVEYOR, 43 MM CC, TAPERED E-7 PWB3-2400-H57 PLACON WIDE CONVEYOR, 57 MM CC, TAPERED E-7 PWC1-2400-H19 PLACON WIDE CNVYR, 18 DIA, 19 CC, 2400 MM E-7 PWC2-2400-H19-EBL PLACON WIDE ESD CNVYR, 18 DIA, 19 CC, 2.4 M E-7 PWL2-3000-H19-EBL WIDE PLACON CNVYR, LOW PROFILE E-11 PWR-1 POWER OUTLET STRIP E-26 SJ3526 HOOK FASTENER TAPE E-25 SJ3527 LOOP FASTENER TAPE E-25 SP-550/25 SPRING FOR LEVELING CART E-32 SP-550/50 SPRING FOR LEVELING CART E-32 SURFACE MATERIALS E-25 TFL-130 FLOOR LOCK E-33 TIEBAR-L HITCH TIE BAR WITH HARDWARE, VARIOUS LENGTHS E-21 TX-0003 ERGONOMIC LIFT SYSTEM E-26 TX-0003-CASTER CASTERS TO FIT LEGS OF ERGO LIFTS E-26 TX-0003-42E 42 MM ERGONOMIC LIFT SYSTEM E-26 TX-0008 CLEAR SHEET HOLDER E-26 TX-0008L PLASTIC SHEET HOLDER, LANDSCAPE E-26 TX-0010 HEAVY DUTY ADJUSTER FOOT E-19 TX-0012(L) FULL EXTENSION DRAWER SLIDE E-33 TX-0013 NARROW T-STANCHION MOUNT E-19 TX-0015 RUBBER END CAP E-18 TX-0016 CLEAR LABEL HOLDER, STANDARD E-22 TX-0016S CLEAR LABEL HOLDER, SHORT E-22 TX-0017A KANBAN SLOT, PLASTIC E-33 TX-0017B KANBAN SPACER, PLASTIC E-33 TX-0017C KANBAN SLOT CAP, PLASTIC E-33 TX-0018 RUBBER END PLUG E-18 TX-0020 MINI-CONVEYOR TRACK CONNECTOR E-16 TX-0070 TOOL HOLDER, 70 MM, WITH PLASTIC INSERT E-32 TX-0070A TOOL HOLDER, METAL BODY E-32 TX-0070B PLASTIC INSERT FOR TOOL HOLDER E-32 TX-0090 WORKSTATION TOOL TROLLEY E-26 TX-2001-F QUICK RELEASE HITCH, TONGUE SIDE E-21 TX-2001SET QUICK RELEASE HITCH SET E-21 TX-2001-T QUICK RELEASE HITCH, RECEIVER SIDE E-21 TX-4018L 28 MM PIPE CLAMP WITH SLOT E-23 TX-4216A-F HITCH FOR 42 MM, 530 MM LNG, BAR END ONLY E-21 TX-4216-T TUGGER SIDE OF 42 MM HITCH, LATCH ONLY E-21800-839-8823www.creform.com CREFORM ACCESSORIES CASTER HARDWARE E-3 See bolt-on casters listed in Section F. Dimensions are in millimeters. See Technical Section H for caster installation instructions. SECTION E Support Plate, for Plastic EF-1002C Surface Treatment: Plated. Used With: ø28 pipes, M8-40LW8 hex bolts (2), EF-1000 (2), caster. Typical Applications: Attach casters to tables, racks, & carts assembled with plastic joints. Lower Strap, for Metal EF-1002F Surface Treatment: Plated. Used With: ø28 pipes, M8-40LW8 hex bolt, EF-1000A, caster, hitch. Typical Applications: Attach casters to tables, racks, & carts assembled with metal joints. 82 35 Upper Strap, for Plastic EF-1000 Surface Treatment: Plated. Used With: ø28 pipes, EF-1002B, M8-40LW8 hex bolt, caster, hitch. Typical Applications: Attach casters to tables, racks, & carts assembled with plastic joints. 70 35 Lower Strap, for Plastic EF-1002B Surface Treatment: Plated. Used With: ø28 pipes, M8-40LW8 hex bolt, EF-1000, caster, hitch. Typical Applications: Attach casters to tables, racks, & carts assembled with plastic joints. 70 35 Upper Strap, for Metal EF-1000A Surface Treatment: Plated. Used With: ø28 pipes, EF-1002F, M8-40LW8 hex bolt, caster, hitch. Typical Applications: Attach casters to tables, racks, & carts assembled with metal joints. 82 35 Support Plate, for Metal EF-1002G Surface Treatment: Plated. Used With: ø28 pipes, M8-40LW8 hex bolts (2), EF-1000A (2), caster. Typical Applications: Attach casters to tables, racks, & carts assembled with metal joints. 147 112 82 84.5 125 105 Corner Plate, Small Right EF-1028SR/L Surface Treatment: Plated. Used With: ø28 pipes, J-105R/L, M8-40LW8 hex bolts (2), EF-1000 (2). Typical Applications: Provides added strength for casters attached to carts assembled with plastic joints. Note: M6-15 hex bolt included. M6 32 60 84.5 20.5 207 102 Corner Plate, Large Right EF-1028LR/L Surface Treatment: Plated. Used With: ø28 pipes, J-105R/L, M8-40LW8 hex bolts (2), EF-1000 (2). Typical Applications: For attaching 200 series casters to carts assembled with plastic joints. Note: M6-15 hex bolt included. M6 32 102 123.5 60 242EF-1253A EF-1253 EF-1252B EF-1252C 800-839-8823www.creform.com CREFORM ACCESSORIES CHANNEL & EXTRUSIONS Dimensions are in millimeters. When ordering, specify color code, see page B-1. E-4 SECTION E Pipe CoverPipe Facing, Small Pipe Facing, Large L-Channel Rail, 20mm L-Channel Rail, 30mmL-Channel Rail, 40mm Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. Colors: Ivory. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Provide flat shelf surface without a step at joint. Colors: Light Gray. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Flat surface of shelf, rack to attach identification labels. EF-1252A Colors: Ivory. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Increases pipe O.D. to equal joint dia. for smooth flow rack pipe surface. EF-1253B Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. 2000 2000 20 2000 34 20 3000 19.5 30 9 3000 19.5 40 9 J-82C Colors: Gray, Ivory. Used With: ø28 pipe. EF-1253 series channel. Typical Applications: Attach shelf rail on one side of pipe. Note: Attach to pipe with Creform Adhesive. 20 J-82B Colors: Gray, Ivory. Used With: ø28 pipe, EF-1253 series channel. Typical Applications: Attach shelf rail on two sides of pipe. Note: Attach to pipe with Creform Adhesive. 20SECTION 800-839-8823www.creform.com EF-1253G EF-1253F EF-1253J EF-1253H E-5 CREFORM ACCESSORIES CHANNEL & EXTRUSIONS SECTION E L-Channel Rail, 60mm L-Channel Rail, 90mmT-Channel Rail, 20mm T-Channel Rail, 30mmU-Channel Rail, 20mm C-Channel Rail, 10mmPipe Cover w/Panel Slot EF-1257 2000 2 ø28 3 Colors: White Gray, Ivory. Used With: ø28 pipe, Creform Adhesive optional. 0.125" panel. Typical Applications: Clips over pipe and provides a receiver slot for a thin panel. EF-1253E EF-1253D Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf of continuous part storage. Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf of continuous part storage. Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Flat part separator for carts, shelves. Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Flat part separator for carts, shelves. 300020 20 20 3 3000 30 30 30 3 3000 20 20 3000 21 9.5 8 3000 19.5 60 10 3000 41 90 10 Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. Dimensions are in millimeters. When ordering, specify color code, see page B-1. L-Channel Rail, 47mm EF-1253C Colors: Light Gray. Used With: J-82B or J-82C. Typical Applications: Rail for drawer or product shelf. 3000 19.5 47 10CREFORM ACCESSORIES CHANNEL & EXTRUSIONS Dimensions are in millimeters. When ordering, specify color code, see page B-1. E-6 SECTION E 800-839-8823www.creform.com Wire Duct DA1-S Colors: Gray, Ivory. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Wire duct along pipe. 2000 16 27.8 Wire Duct DA2-S Colors: Gray, Ivory. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Wire duct along pipe. Wire Duct DB1-S Colors: Gray, Ivory. Used With: ø28 pipe, Creform Adhesive. Typical Applications: Wire duct along pipe. 2000 21 27.8 2000 11 20E-7 ESD anti static SECTION E 800-839-8823www.creform.com CREFORM ACCESSORIES PLACON WIDE ROLLER CONVEYORS Dimensions are in millimeters. See Technical Section H for conveyor data. Wide Conveyor ø41, 43CC, Straight Roller Wide Conveyor ø41, 57CC, Straight Roller Wide Conveyor ø41, 86CC, Straight Roller Wide Conveyor ø41, 43CC, Tapered Roller Wide Conveyor ø41, 57CC, Tapered Roller Wide Conveyor ø18, 19CC, Straight Roller Wide Conveyor, ø18, 19CC, Straight Roller, ESD Wide Conveyor ø41.3, 43CC, Straight Roller, ESD KWA2-3000-H43-EBL PWC2-2400-H19-EBL Construction: Galvanized steel, ESD plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks, gravity conveyors and anti-static structures. Note: 2.4m long, ESD. Construction: Galvanized steel, stainless covered ESD plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks, gravity conveyors and anti-static structures. Note: 3m long, ESD. PWA3-2400-H57PWA1-L-H43 Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m and 3m lengths. Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m long. PWB1-2400-H43 PWA5-2400-H86 Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m long. Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m long. PWC1-L-H19 PWB3-2400-H57 Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m long. Construction: Galvanized steel, plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks and gravity conveyors. Note: 2.4m and 3m lengths.ø28 Wide Conveyor Track Mount Basic EF-2065C Surface Treatment: Plated. Used With: ø28 pipe, PWA, PWB, PWC, KWA, KWC. Typical Applications: End mount of conveyor rail for gravity conveyors, ow racks. ø28 Wide Conveyor Track Mount w/Stop EF-2065DW Surface Treatment: Plated. Used With: ø28 pipe, PWA, PWB, PWC, KWA, KWC. Typical Applications: End mount of conveyor rail with drop stop for gravity conveyors, ow racks. EF-2065D Surface Treatment: Plated. Used With: ø28 pipe, PWA, PWB, PWC, KWA, KWC. Typical Applications: End mount of conveyor rail with blade stop for gravity conveyors, ow racks. ø28 Wide Conveyor Track Mount w/Stop Wide Conveyor Track End Bracket EF-2065HB Surface Treatment: Plated. Used With: PWA, PWB, PWC, KWA, KWC. Typical Applications: Fits over end of overhanging conveyor track to retain wheel sets. Wide Conveyor Track Connector EF-2065HA Surface Treatment: Plated. Used With: PWA, PWB, PWC, KWA, KWC. Typical Applications: Connects runs of wide conveyor rails. SECTION E 800-839-8823www.creform.com E-8 CREFORM ACCESSORIES PLACON WIDE ROLLER CONVEYORS Dimensions are in millimeters. See Technical Section H for conveyor data. Wide Conveyor, ø18, 19cc, Straight Roller, ESD KWC2-3000-H19-EBL Construction: Galvanized steel, stainless covered plastic & stainless axles. Used With: Creform pipes, various mounts. Typical Applications: Flow racks, gravity conveyors and anti-static structures. Note: 3m long, ESD ø28 Wide Conveyor Track Union, Rigid EF-2065E Surface Treatment: Plated. Used With: ø28 pipe, PWA, PWB, PWC, KWA, KWC. Typical Applications: Crossing intersection of pipe and conveyor rail for gravity conveyors, ow racks. ø28 Wide Conveyor Track Stabilizer EF-2065G Surface Treatment: Plated. Used With: ø28 pipe, PWA, PWB, PWC, KWA, KWC. Typical Applications: Intermediate mounting of conveyor rail for gravity conveyors, ow racks. ESD anti staticNext >